AL Priority CPU Boxes manufactured before July 2015 can no longer be supported starting from firmware 5.6.3, released on 2020-07-31, due to hardware / memory limitation.
Uniden R7 Update - Firmware v.1.34 beta is the first time Uniden debut its Auto Mute Memory feature, allowing stationary false X and K-band signals to be locked out automatically. BSM filtering has also been drastically improved.
Uniden R7 Update - Firmware v. 1.33 Uniden continues to impress by releasing firmware updates for its flagship R7 radar detector, a major improvement on both performance and filtering. Key improvements are MRCD filtering, K-filters, and DragonEye detection.
AL Priority Control Box Firmware 5.2.1 Release Note (Release Date: 2015-12-16) Advanced Laser Cruise Control (LCC) Filtering: Owners of LCC-equipped cars like Volvo, Mazda, Infiniti, etc. now can safely install and run ALP without interference. Users will need to select your type of vehicle on the configuration web site to enable additional filtering Configuration Profiles: Double-click the Menu button to change between Profile Settings A, B or C. The selected Profile will be announced by voice over the HiFi Control set. This feature is only available on systems with voice output. AL Priority now uses the CONFIG.alp and STATS.alp files, instead of the old SETUP.alp. alpupdate.com website will create a CONFIG.alp file to transport your configuration to the ALP. When saving statistics from your ALP to a USB flash drive your ALP will create a STATS.alp file and a CONFIG.alp file. When sending your Statistics for support questions, send in your STATS.alp file only. Improved LIDAR Support: Antilaser works very hard to acquire new (and expensive!) LIDAR guns so users can have protection against the latest threats. Details are no longer released to the public. However, it's highly recommended that users stay up to date on Cbox firmware. Added support for the Radenso HD+ radar antenna (coming soon!) Various bug-fixes and stability improvements (Radar antennas, etc.). Added support for Gen.2 Bluetooth Module. Voicepack Update (Release Date: 2015-12-15) Gen. 6 - required for HiFi Cset users. Visit Firmware Solutions website at www.alpupdate.com.
AL Priority Control Box Firmware 5.1.4: bug fixes, LID performance updates, voice pack update, 0-60 performance test (VBOX style) requires GPS, LCC filtering improved, menu-option sensor count now memorize sensor locations.
Beginning in mid-June, 2015, all Canadian AL Priority orders are shipped with a Control Unit (regular or HiFi model) pre-loaded with factory parking-only-mode firmware. Users or installers must download and load the latest firmware update to activate LID (laser interference defence) and other functions. Please read our detailed instructions below: http://www.kmph.ca/pages/firmware-update-required-after-installing-your-al-priority
Control Box Firmware update Ver. 5.1.3/6.3 List of news: 1. Various bug-fixes and stability improvements (Self-test,Voice, Regions, Radars, GPS etc.). Improved selftest diagnostics 2. Laser interference performance improved. 3. New Service code Sixty to Zero is available (Yellow 7: 3-2-2). This will temporarily turn your ALP system into a performance meter able to measure your vehicles Braking time from 60 mph to 0 mph. This mode only works if a GPS Antenna is connected and if a HiFi Control Set is used. 4. New Service code Quarter-Mile is available (Yellow-7: 3-2-3). This will temporarily turn your ALP system into a performance meter able to measure your vehicles time to cross a distance of a ¼ mile from a full stop. Time in seconds and exit speed in mph is given as a result. This mode only works if a GPS Antenna is connected and if a HiFi Control Set is used. 5. Initial Release to Support “Over the Air” OTA wireless firmware updates of the ALP system over the ALPConnect® smartphone app. The latest ALP BT Module is required! The 5.1.3 firmware update needs to be applied via USB flash drive and only then will future updates be possible on the OTA feature of the ALPConnect! 6. Support for German and Hungarian Voicepacks for the ALP HiFi Control Set (must download voicepack separately!). 7. New selectable option: GPS signal lost - voice warning. It can be set to announce loss of GPS lock: every time, during longer absence of signal, or only the first time it happens. 8. New feature, Get Serial Number of your ALP Control Box to a USB. Insert a USB flash drive containing an empty "getsn.alp" file on it and the ALP will write an "sn.alp" file containing the serial number onto the USB drive.
2015-04-24: AL Priority Control Box Firmware Update Release 5.1.1: Various bug fixes and stability improvements (PDC, Counters, HiFi support, GPS, Demo mode etc.). Self-test routine improved. Laser support improved - Important update for users in North America and Hungary! Initial Release to Support the Valentine 1 radar detector connection over the newly released RG Plugin 2. When connected the V1 alerts will be announced over the ALP system and the V1 can be setup over the alpupdate website. This option is ONLY available with the NEW RG Plugin 2! (coming May 2015) New selectable option is available: After LID timeout. Select between two options. If DLI & Warm-up is selected, the ALP will switch to detect only mode after the LID timer (3-9 seconds) times-out during a Laser alert. It will remain in detect only mode as long as you are being actively targeted, and then it will go into a warm-up. If Warm-up is selected, the system will go into a 60 seconds of warm-up mode before it reactivates detection and/or defense again. New selectable option is available: Menu button short press function. Short press of the Menu button can now have several functions: Fog lights, None and Force parking only. Use Fog lights (default) to turn the Fog lights on/off on the ALP sensor version with Fog lights; use None for the short press to have no action; use Force parking only to change between your active Setup and Forced PDC only mode. New selectable option is available: Lock Volume of Laser alerts. Volume of Laser alerts can now be set to predefined level independently of the Master Volume level. If locked, changing the Master Volume (purple menu) will not change the Laser volume as it will remain locked to it's predefined value. New selectable option is available: Lock Volume of Radar alerts. Volume of Radar alerts can now be set to predefined level independently of the Master Volume level. If locked, changing the Master Volume (purple menu) will not change the Radar volume as it will remain locked to it's predefined value. New selectable option is available: Below selected LID Speed Limit for users with the GPS receiver installed. This option alows to select which mode will the system be in when car is driving bellow the speed defined as a speed for activating laser defense. When driving bellow selected LID speed limit it can be set to remain in PDC only OR in DLI (Detecting laser) mode.